Oil Capitol Valves (OCV) valves are hydraulically operated, diaphragm actuated for multi-function control of non-corrosive, non-abrasive fluids.
Available in globe or angle configuration, these fully automatic valves operate off line pressure or if desired, from an independent power source.
The wide range of control pilots makes it possible to offer combination models for virtually any fluid-handling need. The basic Series 65 valve contains only one moving part. This simplicity of design promotes dependability, reduces down-time, facilitates service and extends the life of the valve.
Control valves are offered for a wide variety of automatic and self-actuated system applications: such as pump control valves, pressure relief and safety valves, and flow control valves.
In-line check valve is mounted between the strainer and meter assembly to help increase air eliminator efficiency by creating additional back pressure and help reduce the reverse back flow.
755 Electronic Preset Valve
A normally closed two-stage piston preset control valve for use with electronic relay control. Stainless steel or brass pilot valves are available. Dimensionally interchangeable with the 750 Hydraulic Preset Valves.
655 Electronic Control Valve
A normally closed two-stage diaphragm preset valve for use with electronic relay control. Stainless steel or brass pilot valves are available. Dimensionally interchangeable with the 650 Hydraulic Preset Valves.